Knowledgebase
Working with Olympus voice recorders
Posted by Kurtis Perry on 13 December 2017 10:42 AM

If you are using an Olympus voice recorder, you must have Olympus Digital Wave Player installed on your Windows PC in order to download files from the device. (Please note: Mac users, if you do not have access to a Windows operating system, you will not be able to pull recorded files off of your Olympus device).

To download Digital Wave Player on a Windows PC:

  1. Download the attached "DigitalWavePlayer.zip," extract and run "Setup.exe."
  2. Download the attached "DigitalWavePlayerUpdate214.zip," extract and run "DWPUP5EN.exe."
  3. If you are running a 64 bit version of Windows, download the attached "VNSeries64Driver.zip," extract and install. If you are running a 32 bit version of Windows, you can skip this step.

Digital Wave Player should now be installed and you can now pull files off your Olympus recorder.

 

Further notes:

To tell if you have a 32 or 64 bit version of Windows:

  1. Navigate to Control Panel > All Control Panel Items > System
  2. Your bit length is displayed under System Type

 



Attachments 
 
 digitalwaveplayer.zip (4.82 MB)
 digitalwaveplayerupdate214.zip (14.07 MB)
 vnseries64driver.zip (1.73 MB)
(3 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Help Desk Software by Kayako fusion